CLICK HERE FOR FREE BLOG LAYOUTS, LINK BUTTONS AND MORE! »

Saturday, December 4, 2010

Amour


Artwork by Anna Marine and she is a pay to use artist, you can currently find her here at Creative Design Outlet. Please make sure that you have the appropriate CILM or Creative Design Outlet artist license to use the same tube as I do.

Supplies Needed:

Tube or image of choice
Scrap Kit: "Amour" by Addictive Pleasures and can be purchased here.
Plug In(s): Alien Skin Xenofex 2 - Constellation
Font(s): Snagglepuss

Here we go!

Open new image, 500x500, flood fill background with white.

Copy and paste ele58, resize as necessary. Add a new vector layer, rectangle and draw out to be just a little bigger than inside of frame, flood filling with paper 7, convert to raster layer. Using Constellation plug in, from top to bottom: 2, 50, 50, 4, 30, 100, 45, keep original image.

Copy and paste ele34, resize, duplicate, mirror.

Copy and paste ele61, resize, duplicate, mirror.

Copy and paste any other elements that you would like to use, resizing and rotating as you go.

Copy and paste the tube of your choice, duplicate, change blend mode to multiply, lower opacity to 70, add a gaussian blur of 5.

At this point, I usually resize if I need a smaller image. I also save both the original size and the smaller size images.

Add a new vector layer for your text - (I floodfilled mine with black) To make it stand out, duplicate the layer, convert bottom layer to raster, expand by 2, flood fill with white.

Go back through to sharpen and add a drop shadow to your layers.

Add your copyright as the finishing touch.

Save your tag in your favorite format and you are done!!

This tutorial was written by Debbie (Mystic Inc Design), 2010. Any resemblance to any other tutorial is purely coincidental and not intended.

For Lost Loves


Artwork by Anna Marine and she is a pay to use artist, you can currently find her here at Creative Design Outlet. Please make sure that you have the appropriate CILM or Creative Design Outlet artist license to use the same tube as I do.

Supplies Needed:

Tube or image of choice
Scrap Kit: "Is it Love" by Addictive Pleasures and can be purchased here.
Font(s): Good Vibrations ROB

Here we go!

Open new image, 500x500, floodfill background with white.

Copy and paste frame 2, resize as necessary.

Copy and paste rose swag, resize.

Copy and paste vine, resize, duplicate, change blend mode to multiply, rote both layers to 90 degrees and move to bottom of frame.

Copy and paste flowers 2, resize, arrange on top of vines, colorize to a shade of red to your liking, duplicate and change blend mode to multiply, rotate both layers 90 degrees, move over vines across bottom.

Copya and paste clock, resize to just fit into flower layers, move on top of frame layer.

Copy and paste any other elements that you would like to use, resizing and rotating as you go.

Copy and paste the tube of your choice, duplicate, change blend mode to multiply, lower opacity to 48, add a gaussian blur of 5.

At this point, I usually resize if I need a smaller image. I also save both the original size and the smaller size images.

Add a new vector layer for your text - (I floodfilled mine with paper 16) To make it stand out, duplicate the layer, convert bottom layer to raster, expand by 2, floodfill with white.

Go back through to sharpen and add a drop shadow to your layers.

Add your copyright as the finishing touch.

Save your tag in your favorite format and you are done!!

This tutorial was written by Debbie (Mystic Inc Design), 2010. Any resemblance to any other tutorial is purely coincidental and not intended.

The Bride and Groom


Artwork by Zindy SD Nielson and you can find her here. Please make sure that you have the appropriate artist license to use the same tube as I do.

Supplies Needed:

Tube or image of choice
Scrap Kit: "A Twilight Wedding 2" by Addictive Pleasures and can be purchased here.
Font(s): Sarah Script

Here we go!

Open new image, 500x500, flood fill background with white.

Copy and paste frame 2, rotate 90 degrees right, resize as necessary, using magic wand, select inside of frame, flood fill with paper 12, move layer underneath frame.

Copy and paste curtain 3, resize, move underneath frame layer, duplicate, mirror.

Copy and paste lights, resize, duplicate, mirror, erase middle light on both layers.

Copy and paste any other elements that you would like to use, resizing and rotating as you go.

Copy and paste the tube of your choice, duplicate, change blend mode to multiply, lower opacity to 58, add a gaussian blur of 5.

At this point, I usually resize if I need a smaller image. I also save both the original size and the smaller size images.

Add a new vector layer for your text - (I flood filled mine with black) To make it stand out, duplicate the layer, convert bottom layer to raster, expand by 2, floodfill with white.

Go back through to sharpen and add a drop shadow to your layers.

Add your copyright as the finishing touch.

Save your tag in your favorite format and you are done!!

This tutorial was written by Debbie (Mystic Inc Design), 2010. Any resemblance to any other tutorial is purely coincidental and not intended.

1776


Artwork by Keith Garvey and he is a pay to use artist, you can currently find him here. Please make sure that you have the appropriate My PSP Tubes or PSP Tubes Emporium artist license to use the same tube as I do.

Supplies Needed:

Tube or image of choice
Scrap Kit: "Revalution" by Addictive Pleasures and can be purchased here.
Font(s): The King and Queen

Here we go!

Open new image, 500x500, flood fill background with white.

Copy and paste frame 3, resize as necessary, using magic wand, select inside of frame, flood fill with paper 12, move layer underneath frame.

Copy and paste flags, resize, move underneath frame layer, multiply.

Copy and paste any other elements that you would like to use, resizing and rotating as you go.

Copy and paste the tube of your choice, duplicate, change blend mode to multiply, lower opacity to 44.

At this point, I usually resize if I need a smaller image. I also save both the original size and the smaller size images.

Add a new vector layer for your text - (I flood filled mine with paper 7) To make it stand out, duplicate the layer, convert bottom layer to raster, drop shadow in black, effects, texture effects, blinds with the settings 2, 30, horizontal, flood fill with black.

Go back through to sharpen and add a drop shadow to your layers.

Add your copyright as the finishing touch.

Save your tag in your favorite format and you are done!!

This tutorial was written by Debbie (Mystic Inc Design), 2010. Any resemblance to any other tutorial is purely coincidental and not intended.

Deadly Sins - Sloth


Artwork by Susan Heidi and she is a pay to use artist, you can find her here. Please make sure that you have the appropriate My PSP Tubes artist license to use the same tube as I do.

Supplies Needed:

Tube or image of choice
Scrap Kit: "Deadly Sins - Sloth" by Grunge & Glitter and can be purchased here.
Mask(s): Insatiable Dreams 137, you can find it here.
Font(s): Alex Brush

Here we go!

Open new image, 500x500, floodfill background with white.

Copy and paste papers 2 as new layer, move to bottom, apply mask, you may want to duplicate.

Copy and paste frame 4, resize as necessary, rotate 12 degrees to the left. Using magic wand, select inside of bottom frame, flood fill with paper 2.

Copy and paste clock, lower opacity down to 22.

Copy and paste element 1, resize, paste over frame 1.

Copy and paste any other elements that you would like to use, resizing and rotating as you go.

Copy and paste the tube of your choice. You may have to use the color settings to change the tone of your tube, say either to change to sepia or gray scale. Duplicate, change blend mode to multiply.

At this point, I usually resize if I need a smaller image. I also save both the original size and the smaller size images.

Add a new vector layer for your text - (I floodfilled mine with black) To make it stand out, duplicate the layer, convert bottom layer to raster, expand by 2, flood fill with white.

Go back through to sharpen and add a drop shadow to your layers.

Add your copyright as the finishing touch.

Save your tag in your favorite format and you are done!!

This tutorial was written by Debbie (Mystic Inc Design), 2010. Any resemblance to any other tutorial is purely coincidental and not intended.

Deadly Sins - Pride


Artwork by Keith Garvey and he is a pay to use artist, you can currently find him here. Please make sure that you have the appropriate My PSP Tubes or PSP Tubes Emporium artist license to use the same tube as I do.

Supplies Needed:

Tube or image of choice
Scrap Kit: "Deadly Sins - Pride" by Grunge & Glitter and can be purchased here.
Mask(s): Insatiable Dreams 157, you can find it here.
Font(s): Ambiance BT Swash

Here we go!

Open new image, 500x500, floodfill background with white.

Copy and paste papers 11 & 7 as new layers, move to bottom, apply masks, lower opacity on 7 to 58.

Copy and paste frame 1, resize as necessary. Copy and paste the tube of your choice, this particular tube I only erased around the waist. Duplicate, change blend mode to multiply, add gaussian blur of 5, lower the opacity of the tube to 86.

Copy and paste element 1, resize, paste over frame 1.

Copy and paste any other elements that you would like to use, resizing and rotating as you go.

At this point, I usually resize if I need a smaller image. I also save both the original size and the smaller size images.

Add a new vector layer for your text - (I floodfilled mine with paper 11) To make it stand out, duplicate the layer, convert bottom layer to raster, expand by 2, flood fill with white.

Go back through to sharpen and add a drop shadow to your layers.

Add your copyright as the finishing touch.

Save your tag in your favorite format and you are done!!

This tutorial was written by Debbie (Mystic Inc Design), 2010. Any resemblance to any other tutorial is purely coincidental and not intended.

Friday, December 3, 2010

Deadly Sins - Greed

Artwork by Zindy SD Nielson and you can find her here. Please make sure that you have the appropriate artist license to use the same tube as I do.

Supplies Needed:

Tube or image of choice
Scrap Kit: "Deadly Sins - Greed" by Grunge & Glitter and can be purchased here.
Mask(s): Insatiable Dreams 228 & 256, you can find them both here.
Font(s): Bilbo

Here we go!

Open new image, 500x500, floodfill background with white.

Copy and paste papers 9 & 7 as new layers, move to bottom, apply masks.

Copy and paste barbed heart, resize as necessary. Using magic wand, select inside of heart, expand by 10, add new layer, paste paper 11. Copy and paste the tube of your choice, making sure to erase all parts outside of heart. Move layers into proper order. You may want to lower the opacity of the tube, I did down to 58.

Copy and paste mesh, resize, paste under paper 11.

Copy and paste any other elements that you would like to use, resizing and rotating as you go.

At this point, I usually resize if I need a smaller image. I also save both the original size and the smaller size images.

Add a new vector layer for your text - (I floodfilled mine with paper 9) To make it stand out, duplicate the layer, convert bottom layer to raster, expand by 2, flood fill with white.

Go back through to sharpen and add a drop shadow to your layers.

Add your copyright as the finishing touch.

Save your tag in your favorite format and you are done!!

This tutorial was written by Debbie (Mystic Inc Design), 2010. Any resemblance to any other tutorial is purely coincidental and not intended.

Deadly Sins - Wrath


Artwork by Zindy SD Nielson and you can find her here. Please make sure that you have the appropriate artist license to use the same tube as I do.

Supplies Needed:

Tube or image of choice
Scrap Kit: "Deadly Sins - Wrath" by Grunge & Glitter and can be purchased here.
Mask(s): Insatiable Dreams 164, you can find it here.
Font(s): A&S Songwriter

Here we go!

Open new image, 500x500, floodfill background with white.

Copy and paste frame 2.

Copy and paste paper 8 as new layer, move to bottom, apply mask, move towards top, merge group, duplicate, move towards bottom.

Copy and paste the tube of your choice, making sure to erase all parts outside of frame, colorize with settings Hue 29 & Saturation 92.

Copy and paste any other elements that you would like to use, resizing and rotating as you go.

At this point, I usually resize if I need a smaller image. I also save both the original size and the smaller size images.

Add a new vector layer for your text - (I floodfilled mine with paper 2) To make it stand out, duplicate the layer, convert bottom layer to raster, expand by 2, flood fill with white.

Go back through to sharpen and add a drop shadow to your layers.

Add your copyright as the finishing touch.

Save your tag in your favorite format and you are done!!

This tutorial was written by Debbie (Mystic Inc Design), 2010. Any resemblance to any other tutorial is purely coincidental and not intended.
Related Posts Plugin for WordPress, Blogger...